Details

<>
Preselector Switch

Underground
Preselector Switch

Application
The reverser switch is included in a customized Master Control Unit according to specification no. 618585, which is used to control the traction and brake effort of a rail vehicle.

This Mode selector switch has a flexible connecting element, serving for the mechanical interlocking between the Power-/ Brake Controller and the Mode selector Switch in this Unit.

General Description Mode- /selector switch
The separate Mode-/ selector switch module is located at the left hand side of the Power-/ brake controller. It includes a control lever to select the driving direction and/ or driving mode. It also includes a key switch to activate the whole Master control unit. All binary signals (switches) are wired up to a connector that is located at the end of a breakout cable.

Interlocking mechanism
Between the mode selector handle, the key switch and the power-/ brake controller a mechanical interlocking system is installed. This interlocking mechanism serves the purpose of avoiding erroneous operation of these components. Whether or not a component is interlocked depends on the position of the other components.

To provide the mechanical interlocking between the separated Power-/ Brake controller and Mode selector switch a flexible connecting element (called Flexball) is used.

operating temperature range                             -5°C  to +40°C
maximum humidity during operation                  95%
power supply voltage                                         110 V DC (+25% / -30%)

Including:
Shock- and vibration test according to               IEC 61373
EMC test according to                                        EN 50 121-3-2
Voltage withstand test                                        acc. to EN 50155 §12.2.9.2 – 50 Hz, 1kV, 1 min